BC Biomedical SA-2010 Uživatelský manuál stáhnout pdf (Strana 12)

This section looks at the layouts of the SA-2010 Models and gives descriptions of the

elements that are present.

For all models, the user controls all Analyzer functions via light touch keys. There is an

audio click when any key is depressed, while a “Razz” or error tone consisting of a rapid

succession of beeps is sounded if an invalid key is depressed. Analyzer modes and

status are indicated by 34 LEDs as well as 3 Neon lamps. A 3-1/2 digit LCD display

conveys DUT test results to the user.

SA-2010 Layout (SA-2010-R shown)

LAYOUT

RS-232 Communication Port

(Note: Only with Option –R)

3-1/2 digit LCD

Display

ISO Test key

& indicator

Load Selection

switch:

AAMI, IEC

NEMA 5-20R

Receptacle for

DUT

Analyzer Mode keys &

indicators:

Mains Voltage

Device (DUT) Current

Earth Resistance

Earth/Ground Leakage

Enclosure Leakage

Lead to Earth Leakage

Lead to Lead Leakage

Lead Isolation Leakage

External Leakage

LCD Unit Indicators:

Volts

Amps

µAmps

Ohms

10 Universal Patient Lead Inputs

Chassis Connector

Patient Lead

Selection keys &

indicators:

Analyzer Receptacle Control

keys & indicators:

Hot

Neutral

Ground

Polarity

Earth/Ground

Fuse

Test Snaps:

100 uA

1.0 Ω

External Lead

Connector

3 Neon indicators for

Incoming Power status

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 31 32

Komentáře k této Příručce

Žádné komentáře

BC Biomedical SA-2010 Uživatelský manuál Strana 12

Komentáře k této Příručce

Související produkty a manuály pro Měření, testování a kontrola BC Biomedical SA-2010