BC Biomedical IPA-2000S Uživatelský manuál stáhnout pdf (Strana 114)

4-4

GETTING READY FOR A DISTAL OCCLUSION TEST

INFUSION INFUSION

INFUSION

ANAN

ALAL

YZER--OCCLYZER--OCCL

YZER--OCCL

USIONUSION

USION

Choose Channel Screen

To run a test, toggle to the appropriate Channel screen

using .

STEP 2

Connect and Prime Device

Connect device under test (DUT) to the unit and prime the

channel. (See PRIMING for details.)

There is an optional NURSE CALL input where the NURSE

CALL output from the DUT can be connected to allow the

unit to record when the DUT sends a NURSE CALL

message.

STEP 1

GETTING READY FOR A DISTAL OCCLUSION TEST

NOTES:

The NORMAL LED on the remote

module will blink at a rate of twice per

second, when a channel needs to be

primed.

As the channel becomes ready, the

NORMAL LED on the remote module

will blink at a rate of once per second.

The priming message will not display

if the DUT is already primed.

NOTES:

There can be up to two modules

connected to the analyzer.

The modules are interchangeable and

the unit will run with a single module

connected to either port.

The Channel 1 or 2 screens will only

be displayed when the modules are

connected to those ports.

These instructions will utilize Channel

1 for examples; Channel 2 functions

identically.

CHANNEL 1 IDLE

PRIME WITH 50 mL

THEN PRESS START

1 2 ... 109 110 111 112 113 114 115 116 117 118 119 ... 161 162

Komentáře k této Příručce

Žádné komentáře

BC Biomedical IPA-2000S Uživatelský manuál Strana 114

Komentáře k této Příručce

Související produkty a manuály pro Měření, testování a kontrola BC Biomedical IPA-2000S